ShimanoDura-Ace R55C4 Road Brake Pads (Alloy Rims)(Return to Product Page)

Ive been cycling since the 80s so it was a novelty to find that I could just replace brake friction surfaces on my Litespeed. Everything used to be vulcanized together. In any case Shimano hasnt changed the shape of the pads in a while so they should fit your application too.

Just spent a few minutes replacing both front and rear pads, after 8000 and 4000 miles respectively. I had started noticing that my stopping was weak and would fade - not good. These pads are great. Inexpensive, easy to install, and long wearing as they replaced the prior iteration of the same pads (although i probably should have changed them some miles back)

These new D-A pads do not melt when wet and do not become impregnated with tiny pieces of metal from the rim or debris from the road, unlike the previous version of D-A brake pads. I was always picking out stuff with an awl before and using fine grit sandpaper to finish the pad surface - no more. The new pads, coupled with the DA 9000 brake mechanisms result in much better stopping power whether wet or dry. I ordered and extra set to retrofit a different bike with older D-A mechanisms.

A perfect fit with my Dura Ace gearing

I am entirely happy with Shimano's brake pads, and have replaced like for like several times on my bikes. These guys last 3000-4000 miles, are 100% reliable and predictable, work pretty well in the rain, and don't squeak. There is a little break in period, perhaps 50-100 miles when they seem less grippy than what they replaced, but then pretty quickly wear in.

Super easy to change out.

I use these with 105 brakes and they work beautifully, I have no trouble stopping even when going 35 mph or faster downhill. I usually only ride in dry conditions so I can't comment on their performance in the rain.

stops the bike well...that's what they are supposed to do...last along time

They work in the sun, they work in the rain, they probably work in the snow but I'll find out for sure in the winter.

Much better stopping power and quieter than my previous brake pads.

I like using Genuine parts when possible. These fit the bill at a good price.

Takes 1 minute to replace and just like that good as new

Fits perfectly. All Hardware included. Easy to install.

I have never been disappointed with a Shimano Dura Ace product.

The quality control is so good , I have never experienced any problems.

So, for me, the slight extra cost for Dura Ace is well worth it, and almost always less than the other high end groups available.

I don't experiment with other chains, brake pads, cassettes or anything aftermarket as I feel Shimano makes the Dura Ace parts to work together the best possible.

They have great brake fade and you will stop on a dime in any weather.

Easy to replace and long lasting!

The set screws are even coated with thread lock, they work as advertised and after 1000 miles have no issues.

I change my brake pads frequently. This is always a decent price and a good addition when I need a few more dollars to reach $50 for free shipping.