SRAM Disc Brake Hose Kits
SRAM Hydraulic Brake Hoses are specific to your brake system and utilize different mounting styles depending on the groupset that you are using. Proper identification is crucial for the correct function and performance of your brakes. Below are the hydraulic line kits that SRAM produces; please remember that these will depend on your brake model.
The double compression hose offers shortening options at both the lever end and caliper. For road bikes, this can assist in sizing lines without removing the bar tape.
Works with AVIDCode/R,Elixir1/3,Juicy3,DB 1/3/8,LevelULT/TLM(B1),Level/T,Guide RE,G2 RE/RS/R, S900 2P(Red,Force,Rival-2PeTapAXS), Level 2P Stealth Ultimate & Silver, Code Stealth Bronze (2023+) and APEX D1 (2023+)
The silver banjo offers adjustment of the brake line length only at the lever body since the banjo is crimped onto the caliper end of the hose and cannot be replaced. The banjo also offers adjustment for line angle at the caliper as well as an adjustment at the lever for hose length.
Works with XX, Juicy Ultimate, Juicy 7, Juicy 5, Guide Ultimate (B1), Guide RSC (B1), Guide RS (B1), Guide R (B1), Guide T (A1), G2 Ultimate, G2 RSC and Level 4P Ultimate & Silver.
The Black Banjo line is seen on road and mountain bike calipers. The black-colored head sits on the caliper and is slimmer than the silver Banjo above. The Banjo also offers adjustment for line angle at the caliper and at the lever for hose length.
Works with Level ULT (A1), Level TLM (A1), CODE R/RSC (B1), Red eTap HRD, S900 Monoblock and Code Stealth Ultimate, Silver and Bronze.
Flat Mount, Beveled Banjo
The Beveled Banjo system utilizes road brakes exclusively; the portion on the shifter is fixed and bolts directly into the fluid body of the lever. As road bikes will generally come fitted with handlebar tape, this design means that the lines can be shortened at the caliper. This kit can also be used for any Double Compression systems, once the Banjos are cut off from the line.
Works with Flat Mount; Red22, Force22, Rival22, Force 1, Force CX1,Apex1 HRD, S700
- Specific brake line and necessary seals
- 2x short (road) compression nuts
- 2x long (MTB) compression nuts
- 2x SRAM Barb
- 2x SRAM Olive
- Caliper compression nut boot
- 2x external cable holders
- 2x stem mounted cable holders
- T8 Torx key for barb installation
For more information please reference SRAM's Brake Hose Guide.
B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
Double Compression, 2000mm
Mfg PartNum: 00.5318.036.000
Silver Banjo, 2000mm
Mfg PartNum: 00.5318.038.000
Black Banjo, 2000mm
Mfg PartNum: 00.5318.039.000
Flat Mount, Beveled Banjo, 2000mm
Mfg PartNum: 00.5318.040.000
Articles will open in new tab.