VittoriaCompetition Latex 700c Road Tube(Return to Product Page)

Compared to butyl tubes these are lighter, better riding, and have improved puncture resistance. They do tend to leak air faster that butyl, so you need to top-off air each ride.

These are very brittle and soft. For some reason when I pumped them to 70 pst the valve popped. So make sure you are extra careful when filling these.

These are the only tubes I'll use for racing and training - with the exception of regular butyl tubes as a spare.

Great tubes. I use them on my back up wheels when not using my tubulars. Can run at fairly low pressure with no pinch flats with better roll feel than a butyl tube. I would recommend you use baby powder when installing these since I have heard of latex tears over time since the tubes can stick or adhere to the tire rubber if they are not coated in powder.

I use this as my racing clincher tube on carbon clinchers, Have done a few crits and a TT with them, confidence inspiring in the corners. Being latex they do lose air quickly compared to a butyl tire, but as I only race with them , this isn't a problem, just pump up tires before racing.

I was skeptical that these tubes would be worth the money but after a few rides I'm sold!! The ride quality of these latex tubes is a definite improvement over cheaper butyl rubber tubes and I have yet to have a flat. They do loose a lot more air pressure overnight than butyl rubber tubes so be sure to inflate before each ride.

So after much research following the hype around latex tubes, I decided to try these along with a new set of Vittoria Corsa N.EXT tires. I am switching (temporarily) from GP5000s which I find to be the gold standard (except when trying to remove and install - an absolute nightmare). My first impressions of the ride have been really favorable - the wheels seem to have a bit more kick in their roll. Very cushy ride along with great grip. From a performance perspective, I'm more than okay with the experience I expected in terms of ride quality and resistance vs the GP5Ks. Granted I am on Trek Domane clocking in just south of 20 lbs (Di2 battery kills weight), these roll great and complement the Corsas very well. Now onto the issues:

1) I have not had enough miles to determine how durable these are vs butyl. There are way too many stories and comments everywhere about how these pinch flat and puncture more easily. I'm simply waiting my turn.

2) I read CO2 cartridges are not compatible with latex due to the temperature at which the gas injects into the tube. The remedy if planning to use C02 (my standard) is to have a regular tube on hand - or a normal hand pump.

3) These are expensive relative to regular tubes. I'm still wondering if they're a fit for me personally over a much longer term than reverting back to performance butyl tubing.

4) I've never run tubeless so I can't make a valid comparison. I simply have no plans whatsoever in converting to tubeless. Not happening.

I bought these after having some success with latex tubes in the past. This bunch? Not so much. I had 2 fail along the valve to tube interface while riding at speed. Luckily, I did not wreck. I'll stick with lightweight butyl.

So I don't review gear much but thought I'd contribute to the geekery of 'tube tech'. So I switched to these latex tubes on both of my road bikes a few years back. I know it's been awhile since I purchased the tubes, but hey.... I like to field test things fully rather than write a review immediately after buying a product like SOOOO many consumers do. Drives me nuts when people do that. I'll admit I was leery of the claims others made about "how sublime latex tubes were". I thought it's a tube, how different can it really be? So I bought several of these 25/28c tubes and used them both on 2 different bikes: 1 frame is carbon, the other is Ti. Tires used were Clement Stradas 28c, and two different Vittoria tires: Corsa and the Rubino, both 25c G+ tires. And what I experienced blew my mind. Supple? Oh yeah! Lower hysteresis? Check! What I didn't expect was decreased flats? Huh? How? I haven't had a flat in over a year and a half, riding the same roads I always have, with thousands of miles ridden. Not one. By lowering the pressures and using wider rims, the tire/tubes are allowed to "flex" over pepples and other irregularities thus preventing flats. AND.....additionally it makes your hands and butt happy. Sounds great huh? Now, what's the bad? Cost, fragility, repairability? Ok, they're more expensive. Initially. But when you factor a likely 4-6 flats minimum/ year, the time spent buying new butyl tubes or repairing butyl tubes, etc, the cost of latex actually becomes more advantageous.. and maybe even cheaper when you consider all of those factors.

Fragile? Yeah, you definitely need to be careful mounting them and ensure the tire is completely in the rims drop-channel and no part of the latex gets pinched..... or BOOM! I talc all my tubes regardless so I'd suggest that as well. When I'm done adding air, I always hold the tubes valve stem while removing the pumps air chuck because the Presta rim hole could potentially start cutting the area around the latex valve. So just learn to be a little more careful handling latex tubes with your monkey hands, and then go ride.

So if you want to decrease the vibrations on all contact points and improve your cycling experience, while even boosting speed a bit, then use these with some higher TPI tires (150-330tpi) and see what you think.

Ahhhhh, latex tubes. So much controversy. The fact is that latex tubes are far superior to butyl except when mounting them. Lighter, more supple and the difference in rolling resistance is incredible. I have actually found they are also more puncture resistant as well. I�ve been cycling all my life and have used latex on and off over the years and every time I go back to them I wonder why I took the out in the first place. The trick is to install them very carefully and make sure they are not pinched by the tire and rim when mounting. Use lots of powder, that is key to longevity. I powder the inside of the tire as well as the tube itself. I�ve had them last for years using them this way. Wish I could find the old orange continental latex tubes but these pinkies are a close second. Buy 3, keep a spare and go for it.

These tubes are extremely unreliable in my experience. I started using them this summer (2023) when I could not find Specialized talced tubes in the 700 x 25/28 size. I purchased 8 of these Vittoria Latex Road Tubes since early June and I have had valve failures on at least six occasions after 40 to 60 miles of use. The most recent was last evening when I went out to ride after work. The tube I was using had no more than six miles on it (I had replaced it when the valve on the prior tube failed about 2 miles from the finish of the ride I was on the weekend before.) I was about 2 miles into the after-work ride when I heard the familiar sound of air whooshing out of the valve stem. These are not punctures. When I try to inflate the tube after it is removed to find out where the puncture is I can't get it to hold air at all. As soon as the pump is removed the air just escapes through the valve.

I use these tubes with Conti GP5000 25mm tires. The feel is similar to the sew up tires that I rode back in the day. Very responsive and lively. Before I used these tubes I used Conti super light (50 grams) butyl tubes. There is no comparison between the two tubes. Have not had a flat with them (or the GP 5000's for that matter). They cost more but they are well worth it if you are looking for a bit more speed and improved feel with the road. If you are not running top tier tires with them I am not sure that I would use them. If you are running good tires then you are foolish not to use latex tubes.

I still use tubes in my Road bike tires, and I think these are the best bang for buck tubes available. I rarely get punctures if that concerns you. I also use a Panaracer tire powder (think talc) on the tubes to reduce the tire casing to tube friction, and maybe puncture chances, which goes against some friction experts position. Regardless, I think these are fast tubes and worth the money. You don't have to worry about burping air out on impacts like tubeless setups either.

These are my first latex tubes. I've ridden on butyl tubes for years, and I do notice a difference. The latex does seem to absorb the bumps more. I've been maybe 300 miles on them with no issues. One thing, the stems are not threaded, so I wonder if pumping the tubes up for every ride will be tough in the tube/stem union. My work-around for this issue is to place half of the stem-cover that comes with tube back on the stem and gently (I do mean gently) secure a small pair of vise-grips to the base of the stem with the vise-grip handles resting on a wooden block that's the same height as the tire and wheel combined. When I attach the pump, the vise grips keep the stem from pushing into the tube. Then when I remove the pump, I hold onto the vise grips, so that the stem doesn't pull on the tube. So far so good.

Tried other brands, and theses are the best IMO. They don�t have as many flats either. You do have to pump them up everyday, but the ride is completely worth it!

Vittoria Competition Latex 700c Road Tube - A lot of old school road riders use latex and for good reason. they provide the most comfortable and supple ride. They are more resistant to punctures than butyl tubes.

Three things to be aware of:

1. You must use tire talc (do not body talc which is corn starch) on the inside of the tire casing and the tube! Otherwise you risk pinching while installing.

2. You will need to air up before each ride. I do regardless of what tubes I use but more so with latex tubes.

3. Carry a butyl tube as a spare as the latex is fastidious to install on the raid without tire talc

I keep going back to the latex tubes and these have been nice ones. I get a little less than a year out of them. Not the cheapest way to go but just seem to be the best. I have had very little problems with flats using them, however where I ride I don't get many flats anyway. They usually fail at the valve when I pump them up prior to a ride, and that only happens after 6-9 months of using them. This time I am going to try them with sealant in them. Even though I do not typically have problems with getting flats I don't want another front tire flat. Some things are only fun once. I don't anticipate any improvement in the longevity, just in flat prevention. I plan on replacing them at the 6-month mark anyway.

Always pump air every ride losing air is that normal

Supple, stretchy, and flexible. They feel better and reduce rolling resistance compared to butyl tubes. No sealant required. No goat heads where I live so your mileage may vary.

Practically the same rolling resistance as tubeless. So noticeably faster and responsive than the old butyl tubes. Feels like an instant upgrade to racing wheels, and much better puncture resistance than butyl as well.