Had these chainrings dropped onto Quark D-Four Power Meter Cranks and fit like a glove. The rest of the gruppo is all Ultegra and performs flawlessly as expected. Dura-Ace is nice, but Ultegra is the workhorse of the Shimano line...light, bulletproof, affordable and dependable! Great deal from Western Bike Works!
Tried cheaping out & bought a 105 series 52 for my Ultegra frontend as all my investigations' online seemed that all 3 Shimano chainrings are interchangeable (& the 105 is half the price of the Ultegra). Yes the bolts line up & the cog works as a cog, although doesn't shift quite as well. Cosmetically though Shimano rather cleverly uses slightly different colors but most importantly, the 4 spiders do not sit flush to the crank, they step down (on 105) not on the Ultegra. Looks very crappy. Bottom line, spend the extra $50 fo the correct Ultegra cog - looks right, color matches, shifting seems better. I now have a 52 tooth 105 chainring sitting around!
I swapped this out for a 36T ring because I live in a flattish area and rarely use my granny gear combo. Shifting up to the 52T outer ring is fine, and I get more useful gear ratios without spending 4x the money on a new cassette.
I'm convinced SRAM is going 1x because they can't infringe on Shimano's awesomeness and actually make a decent front derailleur. I recently switched back to a Shimano front and love it.
I bought a 39T ring to replace the stock little ring on my 52T/36T crankset. I live in an area with lots rolling terrain, and the 39T ring helps me hit the gearing sweetspot without inefficient crosschaining. I run a 11T-28T cassette and never feel undergeared on hills. Shimano says the 39T is only for use with the 53T ring, but mine works fine with the 52T; I've ridden this setup almost daily for ~2 months and only dropped a chain once due to bad shifting/pedaling technique.
After 11,000 miles and a couple of chain replacements another chain was due, wearing to .75%. That was more than my original front chain rings could bear and I was slipping on my large ring after the new chain was installed. I replaced my rings with these and no more slipping. In fact, what surprised me was the decrease in noise. It was remarkable. These are not cheap but they're genuine, in stock, and shipped right away. It was well worth it.
My bike had a compact set, which was just a little too low for my fast bike. I like spinning fast on my inner ring, but with a 34 tooth Id have to almost cross chain to go my normal speed. I bought a 36, and it is perfect. Now I can keep it more in the middle of my cassette and spin away. Good quality, worked perfectly swapping the 34 to the 36, with a 50 outer.