Feedback SportsRakk Storage Stand(Return to Product Page)

This works as advertised. It does seem a bit tippy at first, but the bike never actually goes over, even if you prod it to see. Liked it well enough to get another.

Great product, high quality materials. Easy to fold down and store anywhere in the trunk.

I use it to hold my bike in the garage.

Too many stands out there hold the bike up by the spokes. This one doesn't and is very easy to use. One thing to watch out for is if you have fenders, the stand will only work front wheel in first. Works fine this way though.

Very sturdy stand Bikes do not lean over so nothing can be stacked on them.

Easy to work on your bike with small adjustments.

We have two road bikes and two cruiser bikes...these racks are so simple...either roll in front or back tire...holds bike upright...easy to fit almost anywhere.

These stands don't take up much room. Hubby and I have cruiser bikes which have kick stands...handle bars on those...one direction...road bike (no kick stand) handle bars fit very close in opposite direction in the stand. I back my road bike rear tire next to the handle bars of my cruiser bike...so this stand makes for very good use of a narrow space.

These racks are just what I was looking for portable, lightweight, and modular. Very well made. The only modification I would suggest is the one I have made The (rear) wheel is cradled in a pair of brackets on the bottom frame (and held in tension by the spring loaded roller arm). These brackets ultimately only support the rear tire with their edges. I affixed some pliable foam to form a cradle to prevent deformation or damage to the tubular tires mounted on my bikes. Everything else is perfect for my purposes.

I've had one of these for a few years. Some of the smartest money I've spent on cycling. It goes in the car with everything else for training rides and event rides so I always have a place to park the bike. No having to lay it down, find a tree to lean it against or leaning it against the car and risk scratching it. As long as the stand is on level pavement it's very stable.

Bought 3 of these to replace slot-style bike stand. They work very well if you ease wheel into stand and keep the bike relatively straight (perpendicular) to the stand. I intended to connect the three stands to make it more secure, but found there wasn't enough clearance between bikes for handlebars. But even without connecting them, the stands stay put - unlike our old stand, which was always sliding out of place. All the same, it'd be nice if Rakk made an extended connector for these that put another 3-4 inches between each bike. I don't worry about this stand bending the wheel out of true because wheel really is held at verticle by spring arm.

If you are using this for a road bike you'll want to put something under your tire. The metal edges on the bottom bracket are sharp enough to cut a tire. It seems they could put a small layer of rubber over the sharp edges.

I four of them contacted together. Makes a nice neat rack for my bikes. There nothing about these rack that I don't like. Western Bike Works has the best price that I have found for these racks. Paid a lot more for my first two.

This stand holds the bike securely in place. Just roll the front or rear tire into the stand and walk away. The only complaint I have is the release pin can become miss aligned and a little hard to release when initially setting the stand up. This would only be a problem if I was opening and closing the stand on a regular basis. Overall, I give it a 9.5.

I really do not use the Feedback stand for storage, I use it to hold the bike upright when I wipe the chain down after every single ride, especially when I am away from home. When at home, I use a Feedback Repair Stand if I need to lube the chain and not just to wipe the chain (or perform other maintenance tasks).

I bought to stands for our garage workout area. They turned out to a great purchase. They are simple to load and unload from and are very stable. An extra benefit: their light weight makes it easy to move around when needed.

I bought two of these stands...one for my gravel bike and the other for road. Regardless of tire size, this Sports Rakk works very well. I can't believe I waited so long to pick these up. So much better than leaning against the wall. Also makes adding air to your tires a lot easier.

Very stable rack for our bikes and it's nice to be able to expand this for multiple bikes. Even works with our larger 40mm wide gravel tires.

This is the fourth one that I have bought of this product. Three of them are regular size tires, and one is for fat tire. They connect to each other and are very well-made.

Super easy to set up. No tools needed. Just pull into place. Bike sits happy front or rear wheel.

This is a great rack and you can connect them together if you have more than one bike. They are really stable and super easy to load your bike - just wheel it onto the stand and it is held. Just pull it off to ride. No lifting or latching required. Also this rack does not touch the bike frame just the tire tread. I even use it to hold the bike for cleaning and chain maintenance. Can be folded flat when not in use and even taken to the races for easy bike storage outside your car. I plan to buy more for my other bikes.

I attached the bike stand to a railroad tie that is a border for my other bikes. It serves the purpose of adding an additional bike slot for my many bikes. It holds my road bike with skinny tires (28mm) securely. It also securely holds my mountain bike with 2.4" tires. The bike stand is less secure with bikes with medium width tires (40-100 mm tires). The bike stand holds those bikes but they lean a bit and is kind of wobbly. The price was reasonable, the installation very simple.