1.800.651.4050 Mon-Sat 8am-5pm PT
FREE SHIPPING ON ORDERS OVER $50More info
JOIN OUR EMAIL LIST
Search
WISH
0
CLICK HERE to join our Email List and get 15% off your first order*
*Restrictions Apply. Click for details.

Pumps & Inflators

Select Category

click for Lezyne products
click for Topeak products
click for Silca products
click for Blackburn products
click for Portland Design Works products
click for Crank Bros products
click for Park Tool products
click for XLAB products
click for Genuine Innovations products
click for MSW products
click for Planet Bike products
click for RockShox products

Recent Reviews

Lezyne Pressure Over Drive with ABS1 Pro
5 rating
by PNW Gravel
Cycling Enthusiast
Seattle, WA
Perfect for tubeless!

Bought this primarily for tubeless set up and it works great! It will only thread onto a valve core, so for tubeless just remove the valve core and hold the head onto the valve stem, flip the switch, and it will seat first try. I did four tubeless tires within 10 minutes without any issues. Because you do need to build pressure in the chamber before using it as a regular pump, I still use a different cheap floor pump for regularly topping tires up. Though it only takes a few extra pumps if you want to use this as a "normal" pump too.

Reviewed 3/28/2024
Was this review useful to you? Yes/No
Thank you for your feedback.
Lezyne Digital Pressure Over Drive With ABS1 Pro
5 rating
by Gitano
Cycling Enthusiast
Bonney Lake, WA
1 of 1 customers found this review helpful.
It made it all sooooo Easy!

I actually took my bike to the wheel builder who made my custom rims to have my first set of tubeless tires mounted on my bike. Two weeks after that I picked up a nail about 25 yards from my private road after riding a 50 mile loop. It penetrated the tire and the rim, so the tire went flat. I walked the remaining distance to my house. When I got inside I tried to pump the tire up, but the hole in tape and rim made that impossible. I had to do what I most dreaded, take the tire off the rim and tape over the hole. I did that with my heart in my thoat thinking I was going to have to drive to the wheel builder and have him do the repair. Before I re-added the sealant I decided to inflate the tire first to insure all was done correctly and that the tire would hold the air. I pumped up the reservoir, attached the pump to the tire, and dropped the release lever. The tire inflated, the bead set with a series of pops that sounded like an car tire inflating in a tire shop, and the air stayed. I knew it would leak without sealant around the bead, but I waited for about an hour to be sure it could hold air, that the hole was properly covered by the added rim tape. Once I was sure, I let the air out, broke the seal and added sealant to the tire. Then I, once again, recharged the reservoir, and heard that lovely sound of the bead resealing on the rim. I haven't been out since then, so the bike has sat on my workstand for three days. There was the normal amount of air loss that one expects with tubeless tires, but nothing beyond that. My confidence in being able to maintain my tires myself from now on has been built. The pump is amazing. Worth every penny. It was easy, pumping the reservoir up to 130 PSI was also easy. I love this pump and consider it an absolute essential if you run tubeless tires. I plan to buy one for my son.

Reviewed 6/24/2023
Was this review useful to you? Yes/No
Thank you for your feedback.
Topeak JoeBlow Sport III Floor Pump
3 rating
by damselfly
Competitive Racer
Santa Fe, NM
2 of 2 customers found this review helpful.
Works --- but not easy to use

I've had a JoeBlow before and really liked it until it finally wore out, so I thought this one would be great. What I do like about it is that it is sturdy, appears to be made well, the guage is easy to read and can fill tires to 160psi. What I don't like is the difficulty using the pump. NO, the hose IS NOT extra long! It is the shortest hose I've ever used! The head has to be placed on the tire valve very quickly and definitively or air will come out of the opposite side of the head. Securing the pump head to the tire valve requires quite a bit of effort, infinitely more than any other pump I've ever used. For the price (bought on sale) the pump is OK but I'll probably try another brand the next time I need a pump.

Reviewed 1/5/2023
Was this review useful to you? Yes/No
Thank you for your feedback.
Fix Manufacturing Eflator Digital Pump
4 rating
by Biker Bruce
Cycling Enthusiast
Greater Chicago area
1 of 2 customers found this review helpful.
This is a great product to replace my floor pump and use on the road. I'm glad I bought it.

I purchased this as I was the benefactor of another rider using their Eflator for me after a flat and 2 Co2 inflator failures. It is fast, easy to use and a lot easier than pumping. My only issue is the size and weight to carry in my jersey for "just in case" flats. I'm glad I bought it.

Reviewed 10/28/2022
Was this review useful to you? Yes/No
Thank you for your feedback.

Best Deals