Ceci n'est pas une pipe!
Often called, "the pipe" at races, Silca's Disc Wheel Adapter smokes the competition with solid 6066-T6 aluminum construction and a Silca 252 elastomer gasket that snaps into place and holds its seal at the highest pressures.
Threads onto any Schrader pump head. 100% US manufactured.
B-Stock - This product has one or more B-Stock units available. These units can be purchased at a discount (see option select). B-Stock units were returned from other customers and may have missing or damaged packaging materials. These units are otherwise as new. The full manufacturer warranty applies. Click Here for more information.
Ordered by Most Relevant First
Not a simple solution to my disc wheel
1 of 1 customers found this review helpful.
There just doesn't seem to be a simple solution to inflating the tire on my HED disc wheel. I think this is probably better than most, but it is still pretty difficult to use. Either it won't stay seated on the valve adequately so that I have to hold pressure on it with one hand while pumping with the other or it seems to lock in place so well that it takes a good bit oomph and rocking back and forth to disconnect it. I worry about damaging the valve-stem using this thing or weakening the attachment point of the valve-stem and tube.
One thing that I have found helpful is that I ordered tubes with a short valve-stem (35mm or less). This gives a little more space for the dance of the valve-stemadapterhand that must take place in the opening of the disc wheel.
Was this review useful to you? Yes
Thank you for your feedback.
Articles will open in new tab.
What you need for a road ride.